Changeable 1/4 Inch Guide Foot

£27.95
In Stock
  • EAN7393033056155
Changeable ¼” Guide Foot for use with Interchangeable Dual Feed

Brand: Huqsvarna Viking
Category: Group 5, 6, 7, 8 (incompatible with Emerald series and Epic 2)
Required accessory: Interchangeable Dual Feed

The Changeable ¼” Guide Foot is attached to the Interchangeable Dual Feed and used for straight stitch and hand look quilt stitch. The guide will help you keep ¼” (6mm) distance.

The Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics that need accurate pattern matching.

Information on use:
1. To attach the Interchangeable Dual Feed to your machine, first remove the presser foot ankle by unscrewing the ankle screw.
2. Place the Interchangeable Dual Feed onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Interchangeable Dual Feed onto the presser foot bar with the presser foot ankle screw.
3. With presser foot bar in the up position, place the Changeable ¼” Guide Foot under the Interchangeable Dual Feed.
4. Push the Changeable ¼” Guide Foot upwards so that it snaps into place.

Piecing:
3. Because this foot has a small opening to better form the stitches for piecing, you can only use the centre needle position straight stitch or the hand look quilt stitch.
4. To begin sewing at the edge of the fabric, place your fabric under the foot, aligning the raw edges with the guide on the foot.
5. Sew the seam, keeping the edges aligned with the guide.

Quilting:
6. The red markings on the foot will help you to align the fabric at the start of your sewing, at corners and at the end of your fabric.
7. Sew with the guide riding in the pieced seam (ditch) of the quilt. When you come to a corner, stop when the ¼” red marking on the foot reaches the seam.
8. With the needle in the fabric, pivot and continue sewing.

9. To remove the changeable foot, push the front of the foot upwards until the foot snaps off.

Part number: 413238345

Please note that this foot is for use with the Interchangeable Dual Feed (sold separately) and cannot be attached directly to your sewing machine.

Want to know more about Husqvarna Viking accessories? Click here to view the Accessories Catalogue.
More Information
GTIN 7393033056155
Write Your Own Review
You're reviewing:Changeable 1/4 Inch Guide Foot
Your Rating