Husqvarna Viking | Quilters Hoop: 200x200 | 920264096

In Stock
Embroider square or circular designs on quilt blocks with the 200 x 200 Quilter’s Hoop.

Scroll down for more information
  • BrandHusqvarna Viking
  • Hoop Height200mm
  • Hoop TypeSpeciality
  • Hoop Width200mm
  • EAN7393033063481

200 x 200 Quilter's Hoop

Brand: Husqvarna Viking
Hoop type: Speciality: Quilters
Embroidery area: 200mm x 200mm (8" x 8")
Compatible with: Epic 2, Epic, Ruby 90, Sapphire 85, Diamond Royale, Diamond deLuxe, Diamond, Brilliance 80, Ruby Royale, Ruby deLuxe, Ruby, Topaz 50, Topaz 30, Topaz 20
Box contains: Hoop, CD with 3 free designs, instructions

You can find more information about hoop types and compatibility here.

The 200mm x 200mm Quilter’s Hoop provides a large square area, perfect for stitching embroidery designs within quilt blocks. A template is included, marked with both inches and centimetres for ease in placing your designs. The template’s centre, horizontal and vertical markings, plus the grid, ensure perfect results.

Information on use

For the best embroidery results, place a layer of stabiliser beneath the fabric. When hooping stabilizer and fabric, make sure that they are smooth and securely hooped.

1. Open the quick release on the outer hoop and loosen the screw. Remove the inner hoop. Place the outer hoop on a firm flat surface with the screw on the lower right. There is a small arrow in the centre of the lower edge of the hoop which will line up with a small arrow on the inner hoop.

2. Place the stabilizer and fabric, with the right sides facing up, on top of the outer hoop. Place the inner hoop on top of the fabric with the small arrow at the bottom edge. If you can see the hoop size in the lower part of the inner hoop, you have attached it correctly.

3. Push the inner hoop firmly into the outer hoop.

4. Close the quick release. Adjust the pressure of the outer hoop by turning the retaining screw. The fabric should be taut in the hoop for the best results.

Note: When embroidering additional designs on the same fabric, open the quick release, move the hoop to the new position on the fabric and close the quick release. When changing type of fabric, you might need to adjust the pressure using the retaining screw. Do not force the quick release.


• 200mm x 200mm (8” x 8”) embroidery area, ideal for stitching embroidery designs on quilt blocks
• Embroider square or circular designs with minimal fabric and stabiliser wastage
• Included with the hoop is a CD with 3 free designs, as well as instructions for sewing projects using the designs


You will need a stabiliser to make your embroidery look its best by preventing the fabric from puckering and slipping, allowing a well-formed stitch to be created. You can browse our range of embroidery stabilisers, backings and toppers here. Not sure which stabiliser is best for you? Click here to take a look at our blog post on choosing embroidery stabilisers.

Part number: 920264096

Want to know more about Husqvarna Viking accessories? Click here to view the Accessories Catalogue.
More Information
GTIN 7393033063481
Hoop Width 200mm
Hoop Height 200mm
Hoop Type Speciality
Brand Husqvarna Viking