Husqvarna Viking | Mega Quilters Hoop: 260x260 | 920563096

In Stock
Embroider onto even the largest quilt blocks with the Mega Quilter’s Hoop.

Scroll down for more information
  • BrandHusqvarna Viking
  • Hoop Height260mm
  • Hoop TypeSpeciality
  • Hoop Width260mm
  • EAN7393033104047

Mega Quilters Hoop

Brand: Husqvarna Viking
Hoop type: Speciality: Quilters
Embroidery area: 260mm x 260mm (10 1/4” x 10 1/4”)
Compatible with: Epic 2, Epic, Ruby 90
Box contains: Hoop and 16 metal hoop clips

You can find more information about hoop types and compatibility here.

The 260 x 260 Mega Quilters Hoop provides very large square area, perfect for stitching embroidery designs within a quilt block. Comes complete with hoop clips for extra stability. Embroidery area is shown on the inner hoop to aid in hooping fabric.

Information on use

For the best embroidery results, place a layer of stabiliser beneath the fabric. When hooping stabilizer and fabric, make sure that they are smooth and securely hooped.

1. Open the quick release on the outer hoop and loosen the screw. Remove the inner hoop. Place the outer hoop on a firm flat surface with the screw on the lower right. There is a small arrow in the centre of the lower edge of the hoop which will line up with a small arrow on the inner hoop.

2. Place the stabilizer and fabric, with the right sides facing up, on top of the outer hoop. Place the inner hoop on top of the fabric with the small arrow at the bottom edge. If you can see the hoop size in the lower part of the inner hoop, you have attached it correctly.

3. Push the inner hoop firmly into the outer hoop.

4. Close the quick release. Adjust the pressure of the outer hoop by turning the retaining screw. The fabric should be taut in the hoop for the best results.

Note: When embroidering additional designs on the same fabric, open the quick release, move the hoop to the new position on the fabric and close the quick release. When changing type of fabric, you might need to adjust the pressure using the retaining screw. Do not force the quick release.


• 260mm x 260mm (10¼ ” x 10¼”) embroidery area, ideal for stitching embroidery designs on quilt blocks
• Embroider square or circular designs with minimal fabric and stabiliser wastage
• 5 free designs with this hoopwhich you can download from the Husqvarna Viking website here


You will need a stabiliser to make your embroidery look its best by preventing the fabric from puckering and slipping, allowing a well-formed stitch to be created. You can browse our range of embroidery stabilisers, backings and toppers here. Not sure which stabiliser is best for you? Click here to take a look at our blog post on choosing embroidery stabilisers.

Part number: 920563096

Want to know more about Husqvarna Viking accessories? Click here to view the Accessories Catalogue.
More Information
GTIN 7393033104047
Hoop Width 260mm
Hoop Height 260mm
Hoop Type Speciality
Brand Husqvarna Viking