Husqvarna Viking | IDF Adjustable Stitch In The Ditch Foot (Group 9) | 920567096

IDF Adjustable Stitch In The Ditch Foot (Group 9)

Brand: Husqvarna Viking
Category: Group 9 only
Suitable for: Epic 2 and 3

Adjustable Stitch-in-the-Ditch foot for the Integrated Dual Feed (IDF) System. Adjust your needle position left or right of the centre position to get the perfect position for your project. With guidelines to turn corners on preferred measurements. For quilting, garment construction and more. To be used with the zigzag stitch plate, not the straight stitch plate.



Information on use:
Stitching in the ditch means stitching in the finished seam of a quilt or binding. There is usually a higher edge to the seam, the side where the seam allowances have been pressed to, and the lower side, the side without the seam allowances.

1. Snap on the Adjustable Stitch-in-Ditch Foot. Thread with matching thread or invisible thread on top and thread to match your quilt back in the bobbin.
2. Place the fabric to be stitched under the presser foot aligning the guide in the centre of the foot with the seam. The guide will automatically fall on the low side of the seam and will stitch flawlessly down the seam of your quilt or binding.
3. If the stitch is not in the seam you can move the needle up to three steps to the left or right to get the stitch perfectly lined up.
4. To pivot ¼” (6 mm) from the end, stop sewing when the front line on the foot is even with the edge of the fabric

Part number: 920567096


Want to know more about Husqvarna Viking accessories? Click here to view the Accessories Catalogue.