Husqvarna Viking | Design Hoop: 180x130 | 920644096
Scroll down for more information
- BrandHusqvarna Viking
- Hoop Height180mm
- Hoop TypeStandard
- Hoop Width130mm
- EAN7393033112202
5" X 7" Design Hoop
Brand: Husqvarna VikingHoop type: Standard
Embroidery area: 180m x 130mm (5" x 7")
Compatible with: Epic 2, Epic, Ruby 90, Sapphire 85, Diamond Royale, Diamond deLuxe, Diamond, Brilliance 80, Ruby Royale, Ruby deLuxe, Ruby, Topaz 50, Topaz 40, Topaz 30, Topaz 25, Topaz 20, Designer SE LE, Designer SE, Designer II, Designer I, Quilt Designer II, Platinum 955E
You can find more information about hoop types and compatibility here.
The Design Hoop is a standard Husqvarna Viking embroidery hoop, which comes included with a number of embroidery machines. Standard type hoops are the most commonly used machine embroidery hoops and can be used for a variety of embroidery styles, from basic fill patterns to appliqué and lacework, they are incredibly useful!
Information on use
For the best embroidery results, place a layer of stabiliser beneath the fabric. When hooping stabilizer and fabric, make sure that they are smooth and securely hooped.1. Open the quick release on the outer hoop and loosen the screw. Remove the inner hoop. Place the outer hoop on a firm flat surface with the screw on the lower right. There is a small arrow in the centre of the lower edge of the hoop which will line up with a small arrow on the inner hoop.
2. Place the stabilizer and fabric, with the right sides facing up, on top of the outer hoop. Place the inner hoop on top of the fabric with the small arrow at the bottom edge. If you can see the hoop size in the lower part of the inner hoop, you have attached it correctly.
3. Push the inner hoop firmly into the outer hoop.
4. Close the quick release. Adjust the pressure of the outer hoop by turning the retaining screw. The fabric should be taut in the hoop for the best results.
Note: When embroidering additional designs on the same fabric, open the quick release, move the hoop to the new position on the fabric and close the quick release. When changing type of fabric, you might need to adjust the pressure using the retaining screw. Do not force the quick release.
Stabilisers
You will need a stabiliser to make your embroidery look its best by preventing the fabric from puckering and slipping, allowing a well-formed stitch to be created. You can browse our range of embroidery stabilisers, backings and toppers here. Not sure which stabiliser is best for you? Click here to take a look at our blog post on choosing embroidery stabilisers.Part number: 920644096
Want to know more about Husqvarna Viking accessories? Click here to view the Accessories Catalogue.
GTIN | 7393033112202 |
---|---|
Hoop Width | 130mm |
Hoop Height | 180mm |
Hoop Type | Standard |
Brand | Husqvarna Viking |